|
How to Use Oral Irrigator? |
|
1. First lift up the jet
bar and position tip in the oral cavity. |
|
2. At change-over switch,
switch to a position where teeth-flushing is ready to use. |
 |
3. Turn faucet
on and regulate the water flow from small to large, depending
on your preference.
|
|
4.
Flush off the food residue between the gums until your oral
cavity clean. |
|
How to Install Oral Irrigator? |
 |
Step 1.
If the change-over switch has a fast fitting, plug in the
hose directly. |
 |
Step 2.
Screw in the jet bar to the other end of the hose |
 |
Step 3.
Fix the base of the jet bar to the wall. Using either of the
following two methods.
Method 1.
Stick the twin adhesive to the back of the bade and then stick
the base to the wall. ( Wipe clean the wall surface where
you wan to stick to with dry clean cloth. )
|
 |
Step 3.
Method 2.
Use electric drill to drill a hole on the wall, then hammer
in the plastic insert and tighten the screw to secure the
base to the wall. |
 |
Step 4.
Place the jet bar on the base in order. The job is then
done.
|
|
|
Oral Irrgator can be installed on majority of aerator
faucets:
|
|
